​

Yes, die-casting mold temperature—whether high or low—directly impacts the selection of die-casting release agents.

For ​higher mold temperatures: If cooling efficiency is poor or mold tempera...

Yes. The entire die-casting process comprises three critical stages: ​melting, ​filling, and ​solidification. Ensuring consistent ​molten aluminum fluidity​ throughout is essential to achieving ...

1. Select a Release Agent Matching Operating Conditions
Choose a die-casting release agent tailored to the application’s demands:

For processes requiring ​high temperature resistance, opt for agent...

1. Die-Casting Machine Tonnage
The larger the die-casting machine tonnage, the bigger the corresponding workpieces—and the higher the demands on the release agent. For example, ​motor housings​ req...

​

To ensure both ​adequate release performance​ and ​effective cleanability, a ​low-silicone die-casting release agent​ is recommended.

If a ​silicone-free requirement​ is explicit, a ​sili...

No. The key is to first clarify the customer’s actual needs. Begin by understanding why they require a silicone-free formulation: most customers associate silicone-free release agents with ​superio...

Compared to squeeze casting, semi-solid die casting includes an additional ​slurry preparation step. During slurry preparation, the molten metal temperature is significantly lower than in squeeze cas...

I. Are There Integrated Large Die-Casting Release Agents?
Yes. Based on customer requirements, they can be categorized into ​Kemi integrated water-based large die-casting release agents​ and ​Kemi ...

Squeeze Casting, also known as ​Liquid Metal Forging, is sometimes referred to as low-speed high-pressure casting or liquid metal stamping. It is a ​cast-forging hybrid process: liquid metal is form...

Squeeze casting is a process where ​high mechanical pressure​ is applied to liquid (or semi-solid) metal flowing slowly into a squeeze mold/die cavity. This enables the metal to form, solidify, and ...

The overall process flow of squeeze casting includes: melting of metal → purification of molten metal → mold preparation → pouring → mold closing and pressurization → extrusion → casting ejectio...

Squeeze casting, also referred to as liquid die forging or a low-speed, high-pressure process, is a manufacturing technique combining casting and forging. It involves alloy filling a mold, solidifying...

Squeeze casting (also called ​liquid metal forging​ or low-speed/high-pressure die casting) is a ​casting-forging hybrid process. It involves shaping molten metal under high pressure with minor pla...

Hello. Under normal circumstances, sticking to the mold is that because the liquid aluminum pouring speed is too fast, corroding mold cavity. Secondly, because...

There are generally two reasons for this phenomenon. The first one may be that the artifacts were carried out , not cleaned well or just simple washing . Anothe...

This possibility is that you choose the inappropriate release agent, which contains high silicon oil composition, which will not only improve the release effici...

First of all, you need to understand your basic production status, including the size of the machine, whether it is high temperature resistant, whether there is...

Because these two models are not suitable for demoulding at ultra high temperature, because the silicon oil is not fully reacted at this time, and the carbon bl...