Die-casting Release Agent Manufacturer -- KZY new materials CO.,LTD provides you with ultra-high temperature resistance, ultra-thin, anti-oxidation , without silicon or less silicon, universal, powder die-casting release agent, and also provides you with frequently asked questions and technical support.Sitemap
Strict control of magnesium melt temperature and composition in die casting is critical because Excessively high temperatures exacerbate oxidation, generate inclusions, and reduce corrosion resis...
Under normal conditions, the mold temperature for magnesium alloy high-pressure die casting must be precisely controlled within 150–250°C to achieve thermal equilibrium and reduce defects such as sh...
① Automotive components: Includes front modules, central console frames, CCB dashboard frames, transmission cases, steering wheel frames, display cases, center consoles, wheel hubs, etc.
When selecting a die-casting release agent, attention should be paid to choosing one that matches the specific operating conditions. Additionally, factors such as cost and service support should als...
No. The suitability of a die-casting release agent’s thermal stability depends on the customer’s actual operating conditions. High thermal stability in a release agent means stronger temperature r...
No. The primary function of die-casting release agents is to assist in demolding during die casting. Under normal circumstances, the requirements for release agents include good lubrication, excel...
The selection of release agents for magnesium alloy die casting or semi-solid die casting depends on actual operating conditions and spraying equipment. In most cases, water-based die-casting rele...
Traditional silicone-containing release agents often lead to poor adhesion in large-scale integrated die casting due to silicone residue—i.e., excessive...
The dyne pen test, also known as a surface tension test, involves gently swiping a dyne pen perpendicular to the surface and observing if the ink retracts or forms water droplets. A non-retracting, no...
Integrated die casting: Clients often face demolding difficulties and challenges in post-cleaning, adhesive, and electrophoretic treatment. Our release age...
Die-casting defects are critical factors influencing casting performance in integrated die casting applications. Among these, alloy fluidity, molten metal front temperature variation, high-speed...
① Excessively concentrated release agent with high gas evolution,② Prolonged spraying time and incomplete drying after air blowing,③ Formulation issues with the release agent itself...
Gas porosity in aluminum die-castings mainly stems from three sources:① Inadequate degassing during melting② Turbulent flow during filling③ Gas from release agents and other factors...
Most cases of workpiece yellowing are attributed to the release agent’s composition, particularly its wax content. A smaller portion stems from the release agent being used at an excessively high c...
Workpiece whitening in die casting mostly stems from high mold temperatures, insufficient heat resistance of the release agent, or excessively high dilution ratios of the release agent. Recommen...
Analyze the difficult-to-clean location and its characteristics，Evaluate cleaning protocols and dilution accuracy，Select a compatible release agent...
No, because the demolding performance of die-casting release agents stems from their spreading efficiency, adhesion, and lubrication. Only when the rele...
The dilution ratio of die-casting release agents is generally determined by customer operating conditions, including die-casting machine tonnage, mold temperature, spray time/volume, casting complex...
Thermal conductivity of die-casting release agents primarily refers to their ability to conduct heat—a property most clearly reflected in the release agent’s heat retention performance. This hel...
