Pour purified water (deionized water) into a mixing tank (target dilution: 1:80–1:150), then add the release agent.
Adjust the dilution ratio based on the die casting’s size, thickness, shape, and mold temperature.
Apply uniformly to the mold surface using automatic spraying equipment or a spray gun.
Avoid well water or hard water—they compromise performance, accelerate carbon buildup, and reduce mold life.
Do not stir with equipment—this alters the dilution ratio and harms workpiece quality.
Store indoors at 10°C–35°C, away from direct sunlight or damp shade.
Use immediately after opening to preserve effectiveness.
For more information about Correct Usage Guidelines for Die Casting Release Agents or die-casting auxiliary materials, and if you need customized die-casting release agent, please contact 15021483232 (same as Wechat)
