Some customers who have not used our release agent ask KzY the question that why their molds and frames were always rusted. Later, KZY asked them to send us some samples.And eventually very little corrosion inhibitor was found in release agents . One of the causes of mold and mold frame rust is lack of corrosion inhibitor or low corrosion inhibitor in the release agent.
At the same time release agent reusing will also lead to mold and mold frame rust. Therefore, the clients who always rescue the release agent need to pay attention to this, trying not to recycle release agent frequently.
In a word, release agent reusing or lack of corrosion inhibitor in release agent will make mold and mold frame become rusted.
KZY release agent manufacturers provide a variety of die-casting release agent. There are KZY610 aluminum magnesium general type, KZY620 economic type, KZY630 ultra-high temperature resistance type, KZY650 aluminum magnesium ultra-thin type, KZY660 anti-oxidation and anti-mildew, KZY681, 682 powder water-based release agent, KZY690 silicon-free, KZY691 less silicon die-casting release agent. For these questions such as mold frequently occurring carbon deposition, the workpieces not easy to be cleaned, the workpieces with black mildew point, release agent with less high temperature resistance and other problems ,we can easily alleviate and solve these. Each of our products have added appropriate corrosion inhibitor, so that the mold and mold frame rust problem can be easily relieved . At the same time, our solid content varies from 20% to 40%, with a better dilution ratio ranging from 1:100 to 1:300. The price is also very reasonable, so as to relieve your financial pressure as much as possible and help you reduce the times of recycling of the release agent.
Our technology comes from Europe and the United States, domestic large factory production and processing for us, we quality quality and technical support, to provide you from pre-sale - selection - order - after-sales one-stop die-casting aluminum alloy demoulding solutions, welcome to consult.
For more information about the Recycling and Disposal of Release Agent or die-casting auxiliary materials, and if you need customized die-casting release agent, please contact 15021483232 (same as Wechat)
