Pour purified water (deionized water) into the dilution tank—typically at a 1:80–1:150 ratio—then add the release agent.
Adjust the dilution ratio based on casting size, thickness, shape, and mold temperature.
Apply the agent evenly to the mold surface using automatic spray equipment or a spray gun.
Avoid well water or hard water: they compromise performance, cause carbon buildup, and reduce mold life.
Do not stir the release agent with equipment—this disrupts the dilution ratio and casting quality.
Store at 10°C–35°C indoors, away from direct sunlight or damp, shaded areas.
Use promptly after opening to preserve quality.
For more information about Proper Use Guidelines for Die Casting Release Agents or die-casting auxiliary materials, and if you need customized die-casting release agent, please contact 15021483232 (same as Wechat)
